RT Level I & RT Safety

RT I operators should be competent to setup the relevant NDT equipment, perform the test, report and classify any indications and record the results, all in accordance with a provided written instruction. General, specific and practical training is provided and daily formative assessments are used to monitor progress. A final assessment is utilised to assess the success of the training programme and to issue a proof of training document. Following the successful completion of the training programme, candidates will be eligible to write the qualification examination conducted by the Personnel Certification Body, where after industrial experience of 3 months can be gained towards personnel certification.

An intricate part of RT inspections are the safety aspects, since the danger of ionisation radiation either via X-ray devices or Isotopes can pose severe health risks and can lead to death, in extreme cases.  Therefore, Radiation safety cannot be over emphasised and while a DoH recognised safety certificate is one of the prerequisites of this course, additional safety training, focusing on the legal and practical aspects of industrial radiography, is included in this three week course and also examined at the end.

Practical applications / techniques

SWSI, DWSI, DWDI / Dense alloy Welded Plates and pipe / Isotope Ir-192 / X-ray / Dense alloy Castings and  forging (optional extra) \ (Light alloy applications available on request)

General Theory

Advantages, disadvantages and limitations / Discontinuities, indications, defects / Radiation Safety, ionisation radiation / Electromagnetic radiation / Origin and properties of γ and X rays / Interaction with matter / Equipment

Specific Theory

Sample preparation / Calibration and functionality checks / Radiation exposure and film parameters / Typical defects and detectability / Calibration and reference samples / Calibration and system checks / Signal interpretation and plotting

Practical Skills

Performance and quality checks / Performance of tests / Exposure charts / Film development / Characterisation of indications / Recording results / Report writing

Course notes shall be provided on first day

RT I General and Specific Notebook / Written instructions / Questions and answer sheets / Homework

 


Access Conditions

Please note that RT Safety is mandatory for access to an RT 1 course and no RT 1 certificate shall be issued unless a RT Safety certificate in accordance with DOH and issued by Nelson Mandela Metropiltan University Certificate can be shown.

Direct access to the course shall be granted if the candidate has passed both mathematics and science at Grade 12 (Proof of Grade 12 – or equivalent such as N3 certificate is required).

Alternatively, the candidate shall be required to pass a Proficiency Exam for surface methods, prior to being eligible to sit the applicable NDT course.

Please note that the Proficiency test is free of charge and only assesses the basic skills relating to mathematics, science, comprehension and communication capabilities required within the applicable NDT method. The pass mark for the Proficiency test is 70%. Please contact Harold Jansen (harold.jansen@saiw.co.za) to ascertain availability and to make a booking.

Proficiency tests are performed on Thursdays between 8:00 and 11:00. In the case of candidates not being able to attend the Proficiency test due to transport problems, arrangements can be made to have the test e-mailed to a suitable invigilator and returned via email once completed.

Costs

Training & Initial Examination (Non Members)

R32 465 (including VAT)

Training & Initial Examination (Examination Members)

R30 030 (including VAT)

Initial Certification

R2 415 (including VAT)

Download RT Level I & RT Safety Details Download Course Application Form